Washing machines have become a necessity rather than a luxury for modern Indian households. Science Daily suggests that in modern households washing machine saves time and energy, and proves to be far more efficient as compared to washing by hand. When your washing machine breaks down, it can be a real pain. Not only do you have to figure out what’s wrong with it, but you also have to find a way to fix it. There are times you see an IFB washing machine error code in India! LG
Most popular washing machine brands in India are Samsung, IFB and LG. We’ve compiled a list of IFB washing machines showing error codes in India and their meanings to save you the headache. So, the next time your washing machine breaks down, you’ll know exactly what to do.
Table of Contents
Common IFB Washing Machine Error Codes in India With Their Solutions
The following are some of the most common IFB frontload and top load washing machine error codes:
E01
The E01 error code on an IFB washing machine indicates that the door is not closed properly.
This can be caused by several things, such as a loose door handle, a broken door latch, or a problem with the door seal. To resolve this problem:
- Start by checking the door handle and latch to ensure they are secure.
- Next, check the door seal to see if it is damaged or not sealing properly. If the seal is damaged, it will need to be replaced. If the door handle, latch, and seal is in good working condition, the problem may be with the door itself. In this case, you will need to call a technician to have the door repaired or replaced.
E02
The E02 IFB washing machine error code indicates that the water tap is not turned on.
To resolve this problem, you will need to turn on the water tap and ensure that water is flowing into the machine. If the problem persists, you may need to call a technician in India.
E03
If your IFB washing machine is giving you the E03 error code, it means that the plug needs to be fitted properly, or the sockets need to be replaced.
Here are some steps you can take to resolve this issue:
- Check the power cord and make sure it is plugged in properly.
- Check the sockets and make sure they are not loose.
- Replace the power cord if it is damaged.
- Replace the sockets if they are damaged.
- Contact a qualified technician if the problem persists.
E04
If your IFB washing machine shows an E04 error code, the washer has detected an issue and is automatically restarting itself after 30 minutes.
This error code is usually caused by an overloaded machine or by a power surge in India or an issue with the washing machine’s circuitry. To resolve this issue, you’ll need to reload the machine with suitable loads or check the washing machine’s power supply and circuit breaker. You may also need to reset the washing machine by unplugging it and then plugging it back in. If the issue persists, you may need to contact a qualified technician for further assistance.
E05
If your IFB washing machine displays the E05 error code, it means a low input voltage or low inlet water temperature. This can be caused by several things, including a faulty power supply or a problem with the water heater. This can be easily fixed in most cases by resolving the problem and adjusting.
If you’re experiencing this problem, here are a few things you can try to fix it:
- Check the power supply to make sure it is working properly.
- Check the water heater to see if it is set to the correct temperature.
- Make sure that the inlet hose is not kinked or blocked.
You can contact IFB customer service for assistance if you are still having trouble.
E06
If your washing machine leaves coins behind after a cycle, it’s likely because the coin trap needs to be cleaned. The coin trap is a small, cylindrical device near the washing machine’s bottom. It catches any coins or other small objects falling into the washer during a cycle.
If the coin trap is full, it can prevent the washing machine from draining properly. This can leave coins and other small objects behind in the washer after a cycle. To clean the coin trap, remove it and empty it. You may also need a small brush to remove any build-up inside the trap.
If you’re still finding coins in the washing machine after cleaning the coin trap, there may be a problem with the washer itself. Consult your owner’s Manual or contact a technician.
rin5 HOLD
If your washing machine is displaying the error code “rin5 HOLD”, it means that the machine is not draining properly, implying an error in the drain program. Several things can cause this, but fortunately, there are a few things you can try to resolve the issue.
First, make sure that nothing is blocking the drain hose in your Indian home. If the hose is kinked or there is a blockage in the drain, the water will not be able to flow out of the machine properly.
Next, check the filter. If the filter is clogged, it can also cause the washing machine to have difficulty draining. Be sure to clean or replace the filter if necessary.
If neither of these solutions solves the problem, you may need to call a technician to come and take a look at your machine.
Some Other IFB Washing Machine Error Codes
dLEr
The IFB washing machine dLEr error code indicates that the program selector switch is not in the correct position. This error is usually due to incorrect installation or a loose connection.
To resolve this error, you need to switch off the washing machine, unplug it from the power outlet, and then check the program selector switch. Once you have checked the switch, you can plug the washing machine back in and turn it on. You may need to contact a service technician for further assistance if the error persists.
dLAY
The IFB washing machine error dLAY indicates that the start mode will be delayed. There are reasons for this error, but it is often easily fixed with a few simple troubleshooting steps.
The first thing you should do if you see this error is to check the power supply.
- Ensure the machine is plugged in, and the outlet is functioning properly. If the power supply is good, the next step is checking the settings.
- Ensure the machine is set to the correct cycle and the delay start feature is turned off. If the settings are correct, the next step is checking the door.
- Ensure the door is closed properly, and no objects are blocking the door. If the door is fine, the last step is checking the filter.
- Please ensure the filter is clean and no debris is blocking it. If not, contact a technician.
tAP
The tap is turned off if your IFB washing machine displays the error code tAP. This is usually caused by lint or other debris in the tap assembly.
To fix this, you will need to clean the tap assembly and ensure that the tap is turned on.
tACO/trC
If your IFB washing machine displays the error code tACO/trC, the program selector must be switched off with a 2-second waiting time.
This can happen for several reasons, but the most common cause is simply forgetting to switch it off. Other causes can include a power outage or a technical error.
This can usually be resolved by turning off the power to the machine for 30 seconds, then turning it back on and selecting a new program. If the error persists, don’t hesitate to contact IBF customer support or customer care for further assistance.
OFEr/Pr5
If your IFB washing machine displays the error code OFer/Pr5, there is a problem with the program selector. To fix this, you must switch off the program selector and wait 2 seconds before restarting the machine.
There are a few possible reasons for this error code to occur. One possibility is that the program selector is not properly calibrated. Another possibility is that something is blocking the program selector from moving. If you continue to experience this error, it is recommended that you contact a qualified technician for further assistance.
HEAt
If your IFB washing machine displays the error code HEAt, it means that the water in the machine is too hot. This can happen for several reasons, but the most common cause is that the machine could not drain the water supply properly before starting the heating cycle.
To fix this error, you must start the machine’s drain cycle after the water has cooled down to 60C. You can do this by pressing and holding the Start/Pause button for three seconds.
L175
If your IFB washing machine displays the error code L175, there is a low voltage issue with the appliance. There are a few possible reasons for this error, including a faulty power supply, a problem with the washing machine’s wiring, or a problem with the appliance’s control board.
If you’re experiencing this error, there are a few things you can do to try to solve it. First, check the power supply to ensure it is working properly.
H260
If your IFB washing machine displays the error code H260, it means a high voltage issue with the machine. Several things can cause this error, but the most common cause is a problem with the washing machine’s power supply.
There are a few different ways to solve this problem, but the most common solution is simply resetting the machine. You’ll need to unplug the machine from the power outlet and then plug it back in. Once the machine is plugged back in, the error code should be cleared, and the machine should be able to function properly.
UnbL
If you have an IFB washing machine in India and see the error code “UnbL,” the load is too small. This can happen for various reasons, such as too little laundry in the machine or an unbalanced load.
There are a few ways you can solve this problem. First, try adding more laundry to the machine. If that doesn’t work, check if the load is balanced. You can open the washing machine door and evenly redistribute the laundry. Finally, you can contact IFB customer service for assistance if you’re still having trouble.
ACHi
If your washing machine is experiencing the error code ACHi, the machine is restarting automatically after the voltage decreases. There are a few reasons why this error code may occur, and fortunately, there are also a few ways to fix it.
A faulty water inlet valve is the most common reason for this error code. The water inlet valve regulates the water flow into the washing machine, and if it is not working properly, the machine will automatically restart once the water pressure drops.
Another possibility is that the washing machine’s pressure switch is not functioning correctly. The pressure switch is responsible for detecting when the water level in the machine is too low, and if it is not working properly, the machine will restart to increase the water level.
ACLo
If your IFB washing machine is displaying the error code ACLo, it means that the machine has restarted automatically after experiencing a voltage increase. This can be caused by several factors, including a power surge or a problem with the washing machine’s electrical supply.
If you’re experiencing this error in India, there are a few things you can do to try and fix the problem. First, check to ensure the washing machine is properly plugged into a surge protector. If it is, try unplugging the machine and then plugging it back in. If this doesn’t work, you may need to reset the washing machine’s electrical supply.
door
If your IFB washing machine displays the error message “door,” the machine is not detecting that the door is closed properly. This can be due to several reasons, such as a misaligned door, a blockage in the door sensor, or a problem with the door itself.
Luckily, this is an easy error to fix. First, check to make sure that the door is properly aligned. If it is, then check the door sensor for any blockages. If there are none, the problem is likely with the door itself. You can try lubricating the door hinges to see if that fixes the problem. If not, then you may need to replace the door.
Conclusion
In conclusion, we have looked at all the error codes for IFB washing machines and what they mean. If you have any questions, drop them in the comments, and we will get back to you as soon as possible.
FAQs
What do I do if my IB washing machine displays an error message?
First, don’t panic. Error messages are usually easy to fix. Start by checking the Owners Manual that came with your washing machine. The manual will have a list of error codes and their meanings. If you can’t find the Manual, you can usually find it online.
Why did my washing machine display an error message?
There are several reasons why your washing machine may have displayed an error message. It could be something as simple as a clogged filter or a loose hose. Or it could be something more serious, like a fault with the washing machine itself.
How can I prevent my IB washing machine from displaying an error message?
There are a few things you can do to help prevent your washing machine from displaying an error message:
1. Be sure to clean the lint filter regularly. A clogged filter can cause all sorts of problems.
2. Check the hoses regularly for any signs of wear or leaks.
3. Make sure to keep the washing machine itself clean.
A build-up of dirt and grime can cause all sorts of problems.
I’ve tried everything, and my washing machine still displays an error message. What now?
If you’ve tried everything and your washing machine still displays an error message, it’s time to call a service technician. There’s likely a more serious problem that needs to be fixed.